Heyo,
i got a pocket reform recently and i really love it <3
The only thing which doesn’t seem to work in sway is the scroll key. Every other key works.
I searched via journalctk, dmesg.. but i can’t find any hint or error why it doesn’t work.
Also updated the keyboard firmware now.. still nothing.
Any hints/tipps how i can debug this?
Thanks!
just installed libinput and the key isn’t recognized there either ^^v
all other ‘mousebuttons’ keys are captured there
Clicking the scroll key by itself would not generate a key code to be detected. Instead holding the scroll Key down changes the behavior of the trackball to a scroll knob vs mouse movement.
Did you try rolling the trackball while holding the key to see if you generate an input event?
oh, i didn’t know. Thanks!
but sadly not.. just the normal pointer motion events
event1 POINTER_MOTION 365 +41.752s -2.16/ 0.00 ( -2.00/ +0.00)
event1 POINTER_MOTION 366 +41.760s -2.00/ 0.00 ( -2.00/ +0.00)
event1 POINTER_MOTION 367 +41.772s -2.00/ 0.00 ( -2.00/ +0.00)
event1 POINTER_MOTION 368 +41.780s 0.00/ -2.00 ( +0.00/ -2.00)
event1 POINTER_MOTION 369 +41.793s 0.00/ -4.00 ( +0.00/ -4.00)
event1 POINTER_MOTION 370 +41.800s 0.00/ -7.05 ( +0.00/ -6.00)
event1 POINTER_MOTION 371 +41.813s 5.23/ -7.85 ( +4.00/ -6.00)
event1 POINTER_MOTION 372 +41.820s 5.56/ -8.34 ( +4.00/ -6.00)
event1 POINTER_MOTION 373 +41.833s 5.56/ -8.34 ( +4.00/ -6.00)
event1 POINTER_MOTION 374 +41.840s 4.80/ -2.40 ( +4.00/ -2.00)
mhh maybe i rly need to pull out a multi-meter 
I think you probably do - this should work out of the box with the standard keyboard firmware and send a scroll event so it’s likely a bad connection.