Looks great! I’m going to try a slight variant of this mod once the following components arrive:
-
Industrial-Grade USB2.0 Expansion Module (Cheap on Amazon, but even cheaper on AliExpress if you’re willing to wait a couple months for it to arrive.)
I already have these parts on hand and not being used for anything at the moment:
-
Huawei E3372
-
A 9-pin USB header cable for connecting to the 2 USB port board.Could not use this, in the end. Made my own with a Dupont cable kit. -
RobotDyn - USB to TTL UART CH340 - Serial Converter Adapter, Micro USB, 5V/3.3V. IC CH340G (Will require modifying the UART mount in the OpenSCAD model.)
Will check in again after my parts arrive sometime between mid-October to mid-November and after I get a chance to try the mod.