Does the Banana Pi CM4 module work for Pocket?

MNT Pocket Reform
6

Here is my setup of RCM4/BPi/A311D in MNT Pocket Reform:

  • note that the heat transfer pad is moved to a slightly different position, it goes on the main processor (labelled Amlogic A311D)
  • MIPI-DSI flat cable is connected to the usual wider connector
  • WiFi antenna goes to the connector next to the “V1.0” but ideally one could upgrade to a dual antenna
  • For initial set up, download, extract and flash a system image named pocket-reform-system-a311d.img.gz to MicroSD card (or ideally, give bmaptool copy the “Download” link of the image) and boot from there: https://mnt.re/system-image

IMG_7051
IMG_70513024×4032 2.95 MB

IMG_7052
IMG_70523024×4032 2.54 MB

5 Likes