RCORE RK3588 CPU and reform2_lpc problem

1

I installed the RCORE CPU on the big Reform 2 and now getting this error in the “dmesg”:

[    5.225312] reform2_lpc: loading out-of-tree module taints kernel.
[    5.225319] reform2_lpc: module verification failed: signature and/or required key missing - tainting kernel
[    5.227918] reform2_lpc: probing ...
[    5.227934] rockchip-spi feb10000.spi: Runtime PM usage count underflow!

Obviously the battery indicator does not work and the “poweroff” command does not shutdown the LPC.

After rebuilding the “reform-tools” and “reform2-lpc-dkms” packages nothing changed.

Is it normal? (i.e. something is unsupported for the rcore cpu)?

I updated the controller firmware once (when there was problem with battery indicator being at 100% all time) and everything worked until I changed the CPU. I have done a clean Debian insall, too.

2

This looks normal, except for the underflow.

Can you see the battery properties in sysfs?

cat /sys/class/power_supply/BAT0/uevent
DEVTYPE=power_supply
OF_NAME=spidev
OF_FULLNAME=/soc@0/bus@30800000/spba-bus@30800000/spi@30830000/spidev@0
OF_COMPATIBLE_0=mntre,lpc11u24
OF_COMPATIBLE_N=1
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_TYPE=Battery
POWER_SUPPLY_STATUS=Charging
POWER_SUPPLY_TECHNOLOGY=Unknown
POWER_SUPPLY_VOLTAGE_NOW=8437000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=96
POWER_SUPPLY_CHARGE_FULL=4000000
POWER_SUPPLY_CHARGE_FULL_DESIGN=4000000
POWER_SUPPLY_CHARGE_NOW=3840000
POWER_SUPPLY_CHARGE_EMPTY=0

1 Like
3

Thank you! Here it is:

cat /sys/class/power_supply/BAT0/uevent                            <~
DEVTYPE=power_supply
OF_NAME=spidev
OF_FULLNAME=/spi@feb10000/spidev@0
OF_COMPATIBLE_0=mntre,lpc11u24
OF_COMPATIBLE_N=1
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_TYPE=Battery
POWER_SUPPLY_STATUS=Not charging
POWER_SUPPLY_TECHNOLOGY=Unknown
POWER_SUPPLY_VOLTAGE_NOW=0
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=0
POWER_SUPPLY_CHARGE_FULL=0
POWER_SUPPLY_CHARGE_FULL_DESIGN=0
POWER_SUPPLY_CHARGE_NOW=0
POWER_SUPPLY_CHARGE_EMPTY=0

Also the Linux kernel is the latest, I think:

Linux eggplant 6.11.7-mnt-reform-arm64 #1 SMP Debian 6.11.7-1+reform20241106T220440Z (2024-11-06) aarch64 GNU/Linux
4

That looks like the communication to sysctl never happened. The properties that would be read from sysctl are 0.

Given the underflow message it looks like there is some error with using the SPI bus but with only this it’s difficult to say what specifically.

It might be useful to paste the full dmesg to see if there is other error.

5

Here it is:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.11.7-mnt-reform-arm64 (debian-kernel@lists.debian.org) (aarch64-linux-gnu-gcc-14 (Debian 14.2.0-8) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.1) #1 SMP Debian 6.11.7-1+reform20241116T090854Z (2024-11-16)
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: MNT Reform 2 with RCORE RK3588 Module
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: 0x00000003fc000000..0x00000003fc4fffff (5120 KiB) nomap non-reusable gap1@3,fc000000
[    0.000000] OF: reserved mem: 0x00000003fff00000..0x00000003ffffffff (1024 KiB) nomap non-reusable gap2@3,fff00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000003ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x3fdeef8c0-0x3fdef2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003ffffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003fbffffff]
[    0.000000]   node   0: [mem 0x00000003fc000000-0x00000003fc4fffff]
[    0.000000]   node   0: [mem 0x00000003fc500000-0x00000003ffefffff]
[    0.000000]   node   0: [mem 0x00000003fff00000-0x00000003ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 256 MiB at 0x00000000daa00000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] percpu: Embedded 34 pages/cpu s99736 r8192 d31336 u139264
[    0.000000] pcpu-alloc: s99736 r8192 d31336 u139264 alloc=34*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: ro no_console_suspend cryptomgr.notests loglevel=3  clk_ignore_unused cma=256M swiotlb=65535  console=tty1
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4128256
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000d2a00000-0x00000000daa00000] (128MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 51687 entries in 202 pages
[    0.000000] ftrace: allocated 202 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [424:479]
[    0.000000] GICv3: Using MBI frame 0x00000000fe610000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @100200000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100210000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @100230000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100240000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000100250000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100260000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003091] Console: colour dummy device 80x25
[    0.003107] printk: legacy console [tty1] enabled
[    0.005300] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005318] pid_max: default: 32768 minimum: 301
[    0.009526] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm
[    0.010066] landlock: Up and running.
[    0.010072] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010187] AppArmor: AppArmor initialized
[    0.010202] TOMOYO Linux initialized
[    0.010244] LSM support for eBPF active
[    0.011816] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.011870] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.017933] rcu: Hierarchical SRCU implementation.
[    0.017944] rcu: 	Max phase no-delay instances is 1000.
[    0.018300] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.019703] fsl-mc MSI: msi-controller@fe640000 domain created
[    0.019730] fsl-mc MSI: msi-controller@fe660000 domain created
[    0.022834] EFI services will not be available.
[    0.023478] smp: Bringing up secondary CPUs ...
[    0.024372] Detected VIPT I-cache on CPU1
[    0.024449] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    0.024465] GICv3: CPU1: using allocated LPI pending table @0x0000000100270000
[    0.024515] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.025503] Detected VIPT I-cache on CPU2
[    0.025575] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    0.025590] GICv3: CPU2: using allocated LPI pending table @0x0000000100280000
[    0.025636] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.026651] Detected VIPT I-cache on CPU3
[    0.026722] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    0.026737] GICv3: CPU3: using allocated LPI pending table @0x0000000100290000
[    0.026781] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.027771] CPU features: detected: Spectre-v4
[    0.027778] CPU features: detected: Spectre-BHB
[    0.027782] CPU features: detected: SSBS not fully self-synchronizing
[    0.027785] Detected PIPT I-cache on CPU4
[    0.027827] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    0.027838] GICv3: CPU4: using allocated LPI pending table @0x00000001002a0000
[    0.027866] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.028734] Detected PIPT I-cache on CPU5
[    0.028785] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    0.028795] GICv3: CPU5: using allocated LPI pending table @0x00000001002b0000
[    0.028825] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.029706] Detected PIPT I-cache on CPU6
[    0.029754] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    0.029764] GICv3: CPU6: using allocated LPI pending table @0x00000001002c0000
[    0.029793] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.030666] Detected PIPT I-cache on CPU7
[    0.030717] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    0.030727] GICv3: CPU7: using allocated LPI pending table @0x00000001002d0000
[    0.030757] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    0.030873] smp: Brought up 1 node, 8 CPUs
[    0.030911] SMP: Total of 8 processors activated.
[    0.030918] CPU: All CPU(s) started at EL2
[    0.030924] CPU features: detected: 32-bit EL0 Support
[    0.030930] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.030937] CPU features: detected: Common not Private translations
[    0.030944] CPU features: detected: CRC32 instructions
[    0.030949] CPU features: detected: Data cache clean to Point of Persistence
[    0.030961] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.030967] CPU features: detected: LSE atomic instructions
[    0.030972] CPU features: detected: Privileged Access Never
[    0.030978] CPU features: detected: RAS Extension Support
[    0.030987] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.031064] alternatives: applying system-wide alternatives
[    0.035553] CPU features: detected: Hardware dirty bit management on CPU4-7
[    0.066504] node 0 deferred pages initialised in 28ms
[    0.066567] Memory: 15723244K/16513024K available (15680K kernel code, 3672K rwdata, 6204K rodata, 2816K init, 863K bss, 519404K reserved, 262144K cma-reserved)
[    0.069086] devtmpfs: initialized
[    0.080978] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.081008] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.083258] 25408 pages in range for non-PLT usage
[    0.083262] 516928 pages in range for PLT usage
[    0.084396] pinctrl core: initialized pinctrl subsystem
[    0.086175] DMI not present or invalid.
[    0.088817] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.089748] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.090158] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.090587] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.090610] audit: initializing netlink subsys (disabled)
[    0.090713] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1
[    0.091409] thermal_sys: Registered thermal governor 'fair_share'
[    0.091414] thermal_sys: Registered thermal governor 'bang_bang'
[    0.091417] thermal_sys: Registered thermal governor 'step_wise'
[    0.091420] thermal_sys: Registered thermal governor 'user_space'
[    0.091423] thermal_sys: Registered thermal governor 'power_allocator'
[    0.091457] cpuidle: using governor ladder
[    0.091480] cpuidle: using governor menu
[    0.091583] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.091715] ASID allocator initialised with 65536 entries
[    0.092578] Serial: AMBA PL011 UART driver
[    0.115865] rockchip_rk3588_pll_wait_lock: timeout waiting for pll to lock
[    0.115870] rockchip_rk3588_pll_set_params: pll update unsuccessful, trying to restore old params
[    0.121530] platform fdd90000.vop: Fixed dependency cycle(s) with /hdmi@fde80000
[    0.121562] platform fde80000.hdmi: Fixed dependency cycle(s) with /vop@fdd90000
[    0.121848] platform fdd90000.vop: Fixed dependency cycle(s) with /hdmi@fdea0000
[    0.121876] platform fdea0000.hdmi: Fixed dependency cycle(s) with /vop@fdd90000
[    0.126482] platform a41000000.pcie: Fixed dependency cycle(s) with /pcie@fe190000/legacy-interrupt-controller
[    0.135743] platform a40000000.pcie: Fixed dependency cycle(s) with /pcie@fe150000/legacy-interrupt-controller
[    0.143625] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.143630] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.143636] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.143639] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.143643] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.143646] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.143649] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.143652] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.150934] ACPI: Interpreter disabled.
[    0.151542] iommu: Default domain type: Translated
[    0.151546] iommu: DMA domain TLB invalidation policy: strict mode
[    0.156038] pps_core: LinuxPPS API ver. 1 registered
[    0.156043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.156050] PTP clock support registered
[    0.156078] EDAC MC: Ver: 3.0.0
[    0.156237] scmi_core: SCMI protocol bus registered
[    0.157436] NetLabel: Initializing
[    0.157440] NetLabel:  domain hash size = 128
[    0.157443] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.157478] NetLabel:  unlabeled traffic allowed by default
[    0.157767] vgaarb: loaded
[    0.157992] clocksource: Switched to clocksource arch_sys_counter
[    0.159876] VFS: Disk quotas dquot_6.6.0
[    0.160027] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.160507] AppArmor: AppArmor Filesystem Enabled
[    0.160547] pnp: PnP ACPI: disabled
[    0.167876] NET: Registered PF_INET protocol family
[    0.168188] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.178019] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.178175] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.178319] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.179527] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.181410] TCP: Hash tables configured (established 131072 bind 65536)
[    0.181747] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.181963] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.182365] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.182883] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.182915] NET: Registered PF_XDP protocol family
[    0.182923] PCI: CLS 0 bytes, default 64
[    0.183109] Trying to unpack rootfs image as initramfs...
[    0.185678] kvm [1]: nv: 529 coarse grained trap handlers
[    0.185874] kvm [1]: IPA Size Limit: 40 bits
[    0.185893] kvm [1]: GICv3: no GICV resource entry
[    0.185896] kvm [1]: disabling GICv2 emulation
[    0.185917] kvm [1]: GIC system register CPU interface enabled
[    0.185933] kvm [1]: vgic interrupt IRQ18
[    0.185963] kvm [1]: VHE mode initialized successfully
[    0.187198] Initialise system trusted keyrings
[    0.187224] Key type blacklist registered
[    0.187420] workingset: timestamp_bits=42 max_order=22 bucket_order=0
[    0.187443] zbud: loaded
[    0.188593] fuse: init (API version 7.40)
[    0.189271] integrity: Platform Keyring initialized
[    0.189284] integrity: Machine keyring initialized
[    0.189296] Key type asymmetric registered
[    0.189299] Asymmetric key parser 'x509' registered
[    1.089638] Freeing initrd memory: 34476K
[    1.109875] alg: self-tests disabled
[    1.110295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.110444] io scheduler mq-deadline registered
[    1.120015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.132074] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.133708] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 26, base_baud = 1500000) is a 16550A
[    1.134702] Serial: AMBA driver
[    1.135240] msm_serial: driver initialized
[    1.135336] SuperH (H)SCI(F) driver initialized
[    1.141931] mousedev: PS/2 mouse device common for all mice
[    1.145151] ledtrig-cpu: registered to indicate activity on CPUs
[    1.145421] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    1.145573] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.145612] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.152612] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.155268] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    1.156590] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    1.160083] NET: Registered PF_INET6 protocol family
[    1.181012] Segment Routing with IPv6
[    1.181062] In-situ OAM (IOAM) with IPv6
[    1.181118] mip6: Mobile IPv6
[    1.181129] NET: Registered PF_PACKET protocol family
[    1.181445] mpls_gso: MPLS GSO support
[    1.186920] registered taskstats version 1
[    1.187081] Loading compiled-in X.509 certificates
[    1.190714] Loaded X.509 cert 'Build time autogenerated kernel key: 685dd22c310ba7da5a0e14d95318479abbb008bd'
[    1.196685] Demotion targets for Node 0: null
[    1.197214] Key type .fscrypt registered
[    1.197218] Key type fscrypt-provisioning registered
[    1.241983] Key type encrypted registered
[    1.242019] AppArmor: AppArmor sha256 policy hashing enabled
[    1.242042] ima: No TPM chip found, activating TPM-bypass!
[    1.242046] ima: Allocated hash algorithm: sha256
[    1.242070] ima: No architecture policies found
[    1.242102] evm: Initialising EVM extended attributes:
[    1.242105] evm: security.selinux
[    1.242108] evm: security.SMACK64 (disabled)
[    1.242111] evm: security.SMACK64EXEC (disabled)
[    1.242113] evm: security.SMACK64TRANSMUTE (disabled)
[    1.242116] evm: security.SMACK64MMAP (disabled)
[    1.242118] evm: security.apparmor
[    1.242121] evm: security.ima
[    1.242124] evm: security.capability
[    1.242126] evm: HMAC attrs: 0x1
[    1.277416] clk: Not disabling unused clocks
[    1.277426] PM: genpd: Disabling unused power domains
[    1.280791] Freeing unused kernel memory: 2816K
[    1.393859] Checked W+X mappings: passed, no W+X pages found
[    1.393878] Run /init as init process
[    1.393881]   with arguments:
[    1.393886]     /init
[    1.393889]   with environment:
[    1.393892]     HOME=/
[    1.393895]     TERM=linux
[    2.492987] usbcore: registered new interface driver usbfs
[    2.493014] usbcore: registered new interface driver hub
[    2.493042] usbcore: registered new device driver usb
[    2.503553] platform fe470000.i2s: Fixed dependency cycle(s) with /i2c@fec80000/codec@1a
[    2.503691] i2c 6-001a: Fixed dependency cycle(s) with /i2s@fe470000
[    2.514751] rockchip-vop2 fdd90000.vop: Adding to iommu group 0
[    2.635188] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.635201] dma-pl330 fea10000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.636632] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.636638] dma-pl330 fea30000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.639028] sdhci: Secure Digital Host Controller Interface driver
[    2.639035] sdhci: Copyright(c) Pierre Ossman
[    2.656799] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_probe] phy_set_drvdata done, about to devm_pm_runtime_enable
[    2.656866] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    2.657881] rockchip-spi feb10000.spi: Runtime PM usage count underflow!
[    2.659967] Synopsys Designware Multimedia Card Interface Driver
[    2.662767] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.662779] dma-pl330 fed10000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.663561] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.663953] rockchip-spi feb20000.spi: Runtime PM usage count underflow!
[    2.665516] rockchip-hdptx-phy fed70000.phy: [DEBUG rk_hdptx_phy_probe] phy_set_drvdata done, about to devm_pm_runtime_enable
[    2.665536] rockchip-hdptx-phy fed70000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    2.666534] spi spi2.0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/regulators/dcdc-reg7
[    2.666649] spi spi2.0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/rk806_dvs1_pwrdn
[    2.666668] spi spi2.0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/rk806_dvs3_null
[    2.666684] spi spi2.0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/rk806_dvs2_null
[    2.666699] spi spi2.0: Fixed dependency cycle(s) with /spi@feb20000/pmic@0/dvs1-null-pins
[    2.668118] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    2.668795] rockchip-hdptx-phy fed70000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    2.671509] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.672693] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    2.672908] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.673568] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    2.673759] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.674064] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    2.674175] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.674475] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    2.674608] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.674802] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    2.729594] rockchip-dw-pcie a41000000.pcie: host bridge /pcie@fe190000 ranges:
[    2.729616] rockchip-dw-pcie a41000000.pcie:       IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[    2.729628] rockchip-dw-pcie a41000000.pcie:      MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[    2.729636] rockchip-dw-pcie a41000000.pcie:      MEM 0x0a00000000..0x0a3fffffff -> 0x0040000000
[    2.729749] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
[    2.730038] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.745289] fan53555-regulator 1-0042: FAN53555 Option[10] Rev[1] Detected!
[    2.745663] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] Detected!
[    2.746244] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] Detected!
[    2.763494] rtc-pcf8523 6-0068: registered as rtc0
[    2.764991] rtc-pcf8523 6-0068: setting system clock to 2024-11-16T10:43:39 UTC (1731753819)
[    2.766382] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    2.766391] rk_gmac-dwmac fe1b0000.ethernet: IRQ sfty not found
[    2.766598] rk_gmac-dwmac fe1b0000.ethernet: supply phy not found, using dummy regulator
[    2.766772] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    2.766778] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: tx_delay.
[    2.766782] rk_gmac-dwmac fe1b0000.ethernet: set tx_delay to 0x30
[    2.766787] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    2.766791] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0x10
[    2.766800] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    2.771835] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_ID
[    2.772114] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.772130] rk_gmac-dwmac fe1b0000.ethernet: 	DWMAC4/5
[    2.772135] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    2.772139] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    2.772142] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    2.772146] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    2.772190] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    2.772194] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.772234] rk_gmac-dwmac fe1b0000.ethernet: device MAC address 8a:a1:ea:30:9d:cd
[    2.772239] rk_gmac-dwmac fe1b0000.ethernet: Enabled L3L4 Flow TC (entries=2)
[    2.772244] rk_gmac-dwmac fe1b0000.ethernet: Enabled RFS Flow TC (entries=10)
[    2.772249] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    2.772252] rk_gmac-dwmac fe1b0000.ethernet: SPH feature enabled
[    2.772256] rk_gmac-dwmac fe1b0000.ethernet: Using 32/32 bits DMA host/device width
[    2.774273] mdio_bus stmmac-0: MDIO device at address 0 is missing.
[    2.803002] rk_gmac-dwmac fe1b0000.ethernet end0: renamed from eth0
[    2.812057] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.812092] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    2.812222] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[    2.812255] xhci-hcd xhci-hcd.0.auto: irq 57, io mem 0xfc000000
[    2.812348] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.812356] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    2.812362] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    2.812443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[    2.812451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.812456] usb usb1: Product: xHCI Host Controller
[    2.812461] usb usb1: Manufacturer: Linux 6.11.7-mnt-reform-arm64 xhci-hcd
[    2.812465] usb usb1: SerialNumber: xhci-hcd.0.auto
[    2.812900] hub 1-0:1.0: USB hub found
[    2.812918] hub 1-0:1.0: 1 port detected
[    2.813109] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.813154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[    2.813161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.813166] usb usb2: Product: xHCI Host Controller
[    2.813169] usb usb2: Manufacturer: Linux 6.11.7-mnt-reform-arm64 xhci-hcd
[    2.813173] usb usb2: SerialNumber: xhci-hcd.0.auto
[    2.813470] hub 2-0:1.0: USB hub found
[    2.813485] hub 2-0:1.0: 1 port detected
[    2.813949] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.813960] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    2.814062] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000808002000010
[    2.814088] xhci-hcd xhci-hcd.1.auto: irq 58, io mem 0xfc400000
[    2.814198] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.814205] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    2.814212] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.814306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
6 
[    2.814088] xhci-hcd xhci-hcd.1.auto: irq 58, io mem 0xfc400000
[    2.814198] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.814205] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    2.814212] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.814306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[    2.814313] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.814317] usb usb3: Product: xHCI Host Controller
[    2.814321] usb usb3: Manufacturer: Linux 6.11.7-mnt-reform-arm64 xhci-hcd
[    2.814326] usb usb3: SerialNumber: xhci-hcd.1.auto
[    2.814661] hub 3-0:1.0: USB hub found
[    2.814676] hub 3-0:1.0: 1 port detected
[    2.814945] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.814989] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[    2.814996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.815000] usb usb4: Product: xHCI Host Controller
[    2.815004] usb usb4: Manufacturer: Linux 6.11.7-mnt-reform-arm64 xhci-hcd
[    2.815008] usb usb4: SerialNumber: xhci-hcd.1.auto
[    2.815310] hub 4-0:1.0: USB hub found
[    2.815324] hub 4-0:1.0: 1 port detected
[    2.839557] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    2.841079] mmcblk0: mmc0:0001 Y0S256 233 GiB
[    2.842928]  mmcblk0: p1 p2
[    2.843902] mmcblk0boot0: mmc0:0001 Y0S256 4.00 MiB
[    2.846194] mmcblk0boot1: mmc0:0001 Y0S256 4.00 MiB
[    2.848169] mmcblk0rpmb: mmc0:0001 Y0S256 16.0 MiB, chardev (237:0)
[    2.938069] rockchip-dw-pcie a41000000.pcie: PCIe Gen.1 x1 link up
[    2.938525] rockchip-dw-pcie a41000000.pcie: PCI host bridge to bus 0004:40
[    2.938547] pci_bus 0004:40: root bus resource [bus 40-4f]
[    2.938563] pci_bus 0004:40: root bus resource [io  0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
[    2.938575] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
[    2.938588] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff] (bus address [0x40000000-0x7fffffff])
[    2.938635] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 PCIe Root Port
[    2.938669] pci 0004:40:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    2.938681] pci 0004:40:00.0: PCI bridge to [bus 01-ff]
[    2.938695] pci 0004:40:00.0:   bridge window [io  0x0000-0x0fff]
[    2.938707] pci 0004:40:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    2.938722] pci 0004:40:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    2.938798] pci 0004:40:00.0: supports D1 D2
[    2.938807] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[    2.945428] pci 0004:40:00.0: Primary bus is hard wired to 0
[    2.945445] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.945750] pci 0004:41:00.0: [168c:002a] type 00 class 0x028000 PCIe Legacy Endpoint
[    2.945865] pci 0004:41:00.0: BAR 0 [mem 0x00000000-0x0000ffff 64bit]
[    2.946464] pci 0004:41:00.0: supports D1
[    2.946474] pci 0004:41:00.0: PME# supported from D0 D1 D3hot
[    2.947238] pci 0004:41:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    2.947294] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[    2.947333] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff]: assigned
[    2.947348] pci 0004:40:00.0: ROM [mem 0xf4300000-0xf430ffff pref]: assigned
[    2.947365] pci 0004:41:00.0: BAR 0 [mem 0xf4200000-0xf420ffff 64bit]: assigned
[    2.947422] pci 0004:40:00.0: PCI bridge to [bus 41]
[    2.947435] pci 0004:40:00.0:   bridge window [mem 0xf4200000-0xf42fffff]
[    2.947451] pci_bus 0004:40: resource 4 [io  0x0000-0xfffff]
[    2.947462] pci_bus 0004:40: resource 5 [mem 0xf4200000-0xf4ffffff]
[    2.947473] pci_bus 0004:40: resource 6 [mem 0xa00000000-0xa3fffffff]
[    2.947484] pci_bus 0004:41: resource 1 [mem 0xf4200000-0xf42fffff]
[    2.952025] pcieport 0004:40:00.0: PME: Signaling with IRQ 71
[    2.952639] pcieport 0004:40:00.0: AER: enabled with IRQ 72
[    2.954376] rockchip-dw-pcie a40000000.pcie: host bridge /pcie@fe150000 ranges:
[    2.954417] rockchip-dw-pcie a40000000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    2.954443] rockchip-dw-pcie a40000000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    2.954490] rockchip-dw-pcie a40000000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0040000000
[    2.965352] rockchip-dw-pcie a40000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
[    3.085451] hid: raw HID events driver (C) Jiri Kosina
[    3.092122] usbcore: registered new interface driver usbhid
[    3.092129] usbhid: USB HID core driver
[    3.158430] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    3.170224] rockchip-dw-pcie a40000000.pcie: PCIe Gen.3 x1 link up
[    3.170497] rockchip-dw-pcie a40000000.pcie: PCI host bridge to bus 0000:00
[    3.170519] pci_bus 0000:00: root bus resource [bus 00-0f]
[    3.170535] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])
[    3.170547] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]
[    3.170561] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff] (bus address [0x40000000-0x7fffffff])
[    3.170641] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 PCIe Root Port
[    3.170666] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x3fffffff]
[    3.170681] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x3fffffff]
[    3.170695] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    3.170706] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    3.170720] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    3.170731] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    3.170746] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    3.170815] pci 0000:00:00.0: supports D1 D2
[    3.170825] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    3.177728] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[    3.177827] pci 0000:01:00.0: [1bb1:5012] type 00 class 0x010802 PCIe Endpoint
[    3.177910] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    3.178650] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    3.183562] usb 4-1: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00
[    3.183574] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.190271] pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: assigned
[    3.190298] pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: can't assign; no space
[    3.190310] pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: failed to assign
[    3.190323] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff]: assigned
[    3.190335] pci 0000:00:00.0: ROM [mem 0xf0300000-0xf030ffff pref]: assigned
[    3.190352] pci 0000:01:00.0: BAR 0 [mem 0xf0200000-0xf0203fff 64bit]: assigned
[    3.190396] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    3.190408] pci 0000:00:00.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    3.190424] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    3.190433] pci_bus 0000:00: resource 4 [io  0x100000-0x1fffff]
[    3.190444] pci_bus 0000:00: resource 5 [mem 0xf0200000-0xf0ffffff]
[    3.190455] pci_bus 0000:00: resource 6 [mem 0x900000000-0x93fffffff]
[    3.190466] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[    3.194216] pcieport 0000:00:00.0: PME: Signaling with IRQ 83
[    3.195047] pcieport 0000:00:00.0: AER: enabled with IRQ 84
[    3.196060] pwm-backlight backlight: invalid default brightness level: 128, using 8
[    3.198014] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    3.199461] rockchip-hdptx-phy fed70000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    3.200469] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    3.200493] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 5
[    3.200576] ohci-platform fc840000.usb: irq 85, io mem 0xfc840000
[    3.214664] hub 4-1:1.0: USB hub found
[    3.214725] hub 4-1:1.0: 4 ports detected
[    3.223513] usbcore: registered new device driver onboard-usb-dev
[    3.243814] rockchip-drm display-subsystem: bound fdd90000.vop (ops rockchip_drm_fini [rockchipdrm])
[    3.244944] dwhdmiqp-rockchip fde80000.hdmi: registered DesignWare HDMI QP I2C bus driver
[    3.244968] rockchip-drm display-subsystem: bound fde80000.hdmi (ops rockchip_drm_fini [rockchipdrm])
[    3.245514] dwhdmiqp-rockchip fdea0000.hdmi: registered DesignWare HDMI QP I2C bus driver
[    3.245529] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops rockchip_drm_fini [rockchipdrm])
[    3.246106] [drm] Initialized rockchip 1.0.0 for display-subsystem on minor 0
[    3.266354] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11
[    3.266380] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.266392] usb usb5: Product: Generic Platform OHCI controller
[    3.266402] usb usb5: Manufacturer: Linux 6.11.7-mnt-reform-arm64 ohci_hcd
[    3.266411] usb usb5: SerialNumber: fc840000.usb
[    3.267205] hub 5-0:1.0: USB hub found
[    3.267255] hub 5-0:1.0: 1 port detected
[    3.314207] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    3.314224] rockchip-hdptx-phy fed60000.phy: [DEBUG rk_hdptx_phy_runtime_resume] called
[    3.331492] Console: switching to colour frame buffer device 240x67
[    3.369921] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    3.388294] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    3.388317] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    3.388324] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    3.388350] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 90,32 bit host data width,256 deep fifo
[    3.388649] dwmmc_rockchip fe2c0000.mmc: Got CD GPIO
[    3.389457] ehci-platform fc800000.usb: EHCI Host Controller
[    3.389488] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 6
[    3.389561] ehci-platform fc800000.usb: irq 92, io mem 0xfc800000
[    3.391605] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    3.391647] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 7
[    3.391698] ehci-platform fc880000.usb: EHCI Host Controller
[    3.391736] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 8
[    3.391774] ohci-platform fc8c0000.usb: irq 91, io mem 0xfc8c0000
[    3.391861] ehci-platform fc880000.usb: irq 93, io mem 0xfc880000
[    3.401451] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.402010] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    3.402138] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[    3.402146] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.402151] usb usb6: Product: EHCI Host Controller
[    3.402156] usb usb6: Manufacturer: Linux 6.11.7-mnt-reform-arm64 ehci_hcd
[    3.402160] usb usb6: SerialNumber: fc800000.usb
[    3.402704] hub 6-0:1.0: USB hub found
[    3.402727] hub 6-0:1.0: 1 port detected
[    3.405035] rk808-regulator rk808-regulator.3.auto: there is no dvs0 gpio
[    3.405053] rk808-regulator rk808-regulator.3.auto: there is no dvs1 gpio
[    3.417838] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 816000 KHz, changing to: 1008000 KHz
[    3.417979] cpu cpu0: EM: created perf domain
[    3.418001] energy_model: Accessing cpu4 policy failed
[    3.418029] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    3.418227] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[    3.418240] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.418249] usb usb8: Product: EHCI Host Controller
[    3.418256] usb usb8: Manufacturer: Linux 6.11.7-mnt-reform-arm64 ehci_hcd
[    3.418263] usb usb8: SerialNumber: fc880000.usb
[    3.419004] hub 8-0:1.0: USB hub found
[    3.419040] hub 8-0:1.0: 1 port detected
[    3.421724] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 816000 KHz, changing to: 1200000 KHz
[    3.421877] cpu cpu4: EM: created perf domain
[    3.421882] energy_model: Accessing cpu6 policy failed
[    3.430004] cpufreq: cpufreq_online: CPU6: Running at unlisted initial frequency: 816000 KHz, changing to: 1200000 KHz
[    3.430110] cpu cpu6: EM: created perf domain
[    3.430113] energy_model: updating cpu0 cpu_cap=397 old capacity=530
[    3.454305] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.11
[    3.454326] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.454334] usb usb7: Product: Generic Platform OHCI controller
[    3.454341] usb usb7: Manufacturer: Linux 6.11.7-mnt-reform-arm64 ohci_hcd
[    3.454349] usb usb7: SerialNumber: fc8c0000.usb
[    3.454939] hub 7-0:1.0: USB hub found
[    3.454978] hub 7-0:1.0: 1 port detected
[    3.460397] nvme nvme0: pci function 0000:01:00.0
[    3.460422] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    3.472371] nvme nvme0: missing or invalid SUBNQN field.
[    3.472490] nvme nvme0: D3 entry latency set to 10 seconds
[    3.473564] hwmon hwmon0: temp1_input not attached to any thermal zone
[    3.476936] nvme nvme0: 8/0/0 default/read/poll queues
[    3.478243] mc: Linux media interface: v0.10
[    3.478864]  nvme0n1: p1
[    3.489961] videodev: Linux video capture interface: v2.00
[    3.499038] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    3.658076] usb 6-1: new high-speed USB device number 2 using ehci-platform
[    3.819655] usb 6-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[    3.819665] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.819669] usb 6-1: SerialNumber: 2D0800896538
[    3.820148] hub 6-1:1.0: USB hub found
[    3.820212] hub 6-1:1.0: 4 ports detected
7 
[    4.096359] EXT4-fs (nvme0n1p1): mounted filesystem 1a7264d7-996f-4d3a-aa59-1000194c0a28 ro with ordered data mode. Quota mode: none.
[    4.114119] usb 6-1.3: new full-speed USB device number 3 using ehci-platform
[    4.230543] usb 6-1.3: New USB device found, idVendor=03eb, idProduct=2042, bcdDevice= 0.01
[    4.230553] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.230557] usb 6-1.3: Product: Reform Keyboard
[    4.230561] usb 6-1.3: Manufacturer: MNT
[    4.251429] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    4.309163] systemd[1]: Inserted module 'autofs4'
[    4.314081] usb 6-1.4: new full-speed USB device number 4 using ehci-platform
[    4.333105] systemd[1]: systemd 257~rc1-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[    4.333121] systemd[1]: Detected architecture arm64.
[    4.335255] systemd[1]: Hostname set to <eggplant>.
[    4.424522] usb 6-1.4: New USB device found, idVendor=03eb, idProduct=2041, bcdDevice= 0.01
[    4.424533] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.424536] usb 6-1.4: Product: Reform Trackball
[    4.424540] usb 6-1.4: Manufacturer: MNT
[    4.448271] systemd[1]: bpf-restrict-fs: Failed to load BPF object: No such process
[    4.470950] systemd-ssh-generator[365]: Disabling SSH generator logic, since sshd is not installed.
[    4.470960] systemd-sysv-generator[367]: SysV service '/etc/init.d/plptools' lacks a native systemd unit file, automatically generating a unit file for compatibility.
[    4.470969] systemd-sysv-generator[367]: Please update package to include a native systemd unit file.
[    4.470978] systemd-sysv-generator[367]: ! This compatibility logic is deprecated, expect removal soon. !
[    4.593689] systemd[1]: Queued start job for default target graphical.target.
[    4.629179] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    4.629823] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    4.630341] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    4.630747] systemd[1]: Created slice user.slice - User and Session Slice.
[    4.630907] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    4.631047] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    4.631376] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    4.631467] systemd[1]: Expecting device dev-mmcblk0p1.device - /dev/mmcblk0p1...
[    4.631545] systemd[1]: Reached target paths.target - Path Units.
[    4.631604] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    4.631660] systemd[1]: Reached target slices.target - Slice Units.
[    4.631720] systemd[1]: Reached target swap.target - Swaps.
[    4.631894] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[    4.632080] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[    4.633274] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[    4.633519] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    4.633768] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    4.634064] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[    4.634174] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.634194] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.634346] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    4.634517] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    4.636640] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    4.638927] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    4.640955] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[    4.643415] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    4.646553] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    4.649163] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp...
[    4.651398] systemd[1]: Starting blk-availability.service - Availability of block devices...
[    4.653445] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    4.655533] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    4.661728] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.668188] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    4.671612] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    4.673565] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    4.675960] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    4.678071] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
[    4.678248] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    4.678291] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    4.680998] systemd[1]: Starting systemd-journald.service - Journal Service...
[    4.683238] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    4.683375] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.684966] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    4.685327] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.687776] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[    4.695883] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    4.705962] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    4.706257] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    4.706465] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[    4.706679] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    4.706880] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    4.707080] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp.
[    4.707493] systemd[1]: Finished blk-availability.service - Availability of block devices.
[    4.708059] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[    4.708531] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    4.709012] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.709247] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    4.709738] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.709964] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    4.711100] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.711309] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    4.712434] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.712746] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    4.713950] systemd[1]: modprobe@nvme_fabrics.service: Deactivated successfully.
[    4.714238] systemd[1]: Finished modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics.
[    4.715608] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    4.717112] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[    4.719993] systemd-journald[388]: Collecting audit messages is disabled.
[    4.721554] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    4.724368] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    4.727606] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    4.728675] EXT4-fs (nvme0n1p1): re-mounted 1a7264d7-996f-4d3a-aa59-1000194c0a28 r/w. Quota mode: none.
[    4.734527] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[    4.737115] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    4.738456] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    4.738526] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    4.743080] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[    4.746077] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.753866] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    4.755319] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    4.772119] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[    4.792635] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[    4.795711] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[    4.799454] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    4.890979] systemd[1]: Started systemd-journald.service - Journal Service.
[    4.929082] systemd-journald[388]: Received client request to flush runtime journal.
[    5.401097] panthor fb000000.gpu: [drm] clock rate = 198000000
[    5.405452] panthor fb000000.gpu: EM: OPP:900000 is inefficient
[    5.405466] panthor fb000000.gpu: EM: OPP:800000 is inefficient
[    5.405470] panthor fb000000.gpu: EM: OPP:700000 is inefficient
[    5.405474] panthor fb000000.gpu: EM: OPP:600000 is inefficient
[    5.405478] panthor fb000000.gpu: EM: OPP:500000 is inefficient
[    5.405482] panthor fb000000.gpu: EM: OPP:400000 is inefficient
[    5.405486] panthor fb000000.gpu: EM: OPP:300000 is inefficient
[    5.405653] panthor fb000000.gpu: EM: created perf domain
[    5.405794] panthor fb000000.gpu: [drm] mali-g610 id 0xa867 major 0x0 minor 0x0 status 0x5
[    5.405802] panthor fb000000.gpu: [drm] Features: L2:0x7120306 Tiler:0x809 Mem:0x301 MMU:0x2830 AS:0xff
[    5.405808] panthor fb000000.gpu: [drm] shader_present=0x50005 l2_present=0x1 tiler_present=0x1
[    5.414622] panthor fb000000.gpu: [drm] Firmware protected mode entry not be supported, ignoring
[    5.414897] panthor fb000000.gpu: [drm] CSF FW v1.1.0, Features 0x0 Instrumentation features 0x71
[    5.431241] hantro-vpu fdb50000.video-codec: Adding to iommu group 1
[    5.439106] [drm] Initialized panthor 1.0.0 for fb000000.gpu on minor 1
[    5.446207] hantro-vpu fdb50000.video-codec: registered rockchip,rk3568-vpu-dec as /dev/video1
[    5.446597] hantro-vpu fdba0000.video-codec: Adding to iommu group 2
[    5.449923] rkvdec2 fdc40000.video-decoder: missing multi-core support, ignoring this instance
[    5.487596] hantro-vpu fdba0000.video-codec: registered rockchip,rk3588-vepu121-enc as /dev/video2
[    5.507148] hantro-vpu fdba4000.video-codec: Adding to iommu group 3
[    5.507258] hantro-vpu fdba4000.video-codec: missing multi-core support, ignoring this instance
[    5.507498] hantro-vpu fdba8000.video-codec: Adding to iommu group 4
[    5.507572] hantro-vpu fdba8000.video-codec: missing multi-core support, ignoring this instance
[    5.507739] hantro-vpu fdbac000.video-codec: Adding to iommu group 5
[    5.507809] hantro-vpu fdbac000.video-codec: missing multi-core support, ignoring this instance
[    5.508567] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    5.510189] input: MNT Reform Keyboard as /devices/platform/fc800000.usb/usb6/6-1/6-1.3/6-1.3:1.0/0003:03EB:2042.0001/input/input0
[    5.511333] hantro-vpu fdc70000.video-codec: registered rockchip,rk3588-av1-vpu-dec as /dev/video3
[    5.550661] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.4.auto/input/input1
[    5.553356] reform2_lpc: loading out-of-tree module taints kernel.
[    5.553372] reform2_lpc: module verification failed: signature and/or required key missing - tainting kernel
[    5.556188] reform2_lpc: probing ...
[    5.556205] rockchip-spi feb10000.spi: Runtime PM usage count underflow!
[    5.561094] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.561309] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.561498] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.561687] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.561876] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.568892] wm8960 6-001a: supply DCVDD not found, using dummy regulator
[    5.574457] wm8960 6-001a: supply DBVDD not found, using dummy regulator
[    5.574682] wm8960 6-001a: supply AVDD not found, using dummy regulator
[    5.575246] wm8960 6-001a: supply SPKVDD1 not found, using dummy regulator
[    5.575539] wm8960 6-001a: supply SPKVDD2 not found, using dummy regulator
[    5.633678] optee: probing for conduit method.
[    5.633685] optee: api uid mismatch
[    5.633688] optee firmware:optee: probe with driver optee failed with error -22
[    5.715323] ath9k 0004:41:00.0: enabling device (0000 -> 0002)
[    6.149723] ath: EEPROM regdomain: 0x0
[    6.149727] ath: EEPROM indicates default country code should be used
[    6.149728] ath: doing EEPROM country->regdmn map search
[    6.149730] ath: country maps to regdmn code: 0x3a
[    6.149731] ath: Country alpha2 being used: US
[    6.149732] ath: Regpair used: 0x3a
[    6.162365] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.162399] hid-generic 0003:03EB:2042.0001: input,hidraw0: USB HID v1.11 Keyboard [MNT Reform Keyboard] on usb-fc800000.usb-1.3/input0
[    6.162528] input: MNT Reform Keyboard as /devices/platform/fc800000.usb/usb6/6-1/6-1.3/6-1.3:1.1/0003:03EB:2042.0002/input/input2
[    6.202048] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0x(____ptrval____), irq=62
[    6.209933] ath9k 0004:41:00.0 wlP4p65s0: renamed from wlan0
[    6.226340] hid-generic 0003:03EB:2042.0002: input,hidraw1: USB HID v1.11 Device [MNT Reform Keyboard] on usb-fc800000.usb-1.3/input1
[    6.226791] input: MNT Reform Trackball as /devices/platform/fc800000.usb/usb6/6-1/6-1.4/6-1.4:1.0/0003:03EB:2041.0003/input/input3
[    6.227465] hid-generic 0003:03EB:2041.0003: input,hidraw2: USB HID v1.11 Mouse [MNT Reform Trackball] on usb-fc800000.usb-1.4/input0
[    7.162057] random: crng init done
[    7.186207] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    7.186251] device-mapper: uevent: version 1.0.3
[    7.186431] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    7.431280] EXT4-fs (mmcblk0p1): mounted filesystem 57dfbb58-9f93-44de-af81-7a6b45f54177 r/w with ordered data mode. Quota mode: none.
[    7.542867] audit: type=1400 audit(1731753824.276:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=594 comm="apparmor_parser"
[    7.542888] audit: type=1400 audit(1731753824.276:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=587 comm="apparmor_parser"
[    7.543173] audit: type=1400 audit(1731753824.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=588 comm="apparmor_parser"
[    7.543179] audit: type=1400 audit(1731753824.276:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=588 comm="apparmor_parser"
[    7.543419] audit: type=1400 audit(1731753824.276:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=591 comm="apparmor_parser"
[    7.543424] audit: type=1400 audit(1731753824.276:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=591 comm="apparmor_parser"
[    7.543427] audit: type=1400 audit(1731753824.276:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=591 comm="apparmor_parser"
[    7.543770] audit: type=1400 audit(1731753824.276:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=593 comm="apparmor_parser"
[    7.545663] audit: type=1400 audit(1731753824.276:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=596 comm="apparmor_parser"
[    7.547712] audit: type=1400 audit(1731753824.280:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/libexec/geoclue" pid=597 comm="apparmor_parser"
[    7.708316] rk_gmac-dwmac fe1b0000.ethernet end0: stmmac_dvr_remove: removing driver
[    7.865177] NET: Registered PF_QIPCRTR protocol family
[    8.680540] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    8.680555] rk_gmac-dwmac fe1b0000.ethernet: IRQ sfty not found
[    8.680750] rk_gmac-dwmac fe1b0000.ethernet: supply phy not found, using dummy regulator
[    8.680882] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    8.680889] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: tx_delay.
[    8.680893] rk_gmac-dwmac fe1b0000.ethernet: set tx_delay to 0x30
[    8.680897] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    8.680901] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0x10
[    8.680912] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    8.685932] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_ID
[    8.686317] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    8.686325] rk_gmac-dwmac fe1b0000.ethernet: 	DWMAC4/5
[    8.686331] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    8.686335] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    8.686338] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    8.686341] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    8.686345] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    8.686348] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    8.686354] rk_gmac-dwmac fe1b0000.ethernet: device MAC address 72:e9:85:65:d5:15
[    8.686360] rk_gmac-dwmac fe1b0000.ethernet: Enabled L3L4 Flow TC (entries=2)
[    8.686364] rk_gmac-dwmac fe1b0000.ethernet: Enabled RFS Flow TC (entries=10)
[    8.686368] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    8.686372] rk_gmac-dwmac fe1b0000.ethernet: SPH feature enabled
[    8.686376] rk_gmac-dwmac fe1b0000.ethernet: Using 32/32 bits DMA host/device width
[    8.708248] rk_gmac-dwmac fe1b0000.ethernet end0: renamed from eth0
[    8.735186] rk_gmac-dwmac fe1b0000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[    8.736422] rk_gmac-dwmac fe1b0000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-1
[    8.808232] rk_gmac-dwmac fe1b0000.ethernet end0: PHY [stmmac-0:00] driver [Micrel KSZ9031 Gigabit PHY] (irq=POLL)
[    8.818153] dwmac4: Master AXI performs any burst length
[    8.818172] rk_gmac-dwmac fe1b0000.ethernet end0: No Safety Features support found
[    8.818186] rk_gmac-dwmac fe1b0000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[    8.818488] rk_gmac-dwmac fe1b0000.ethernet end0: registered PTP clock
[    8.819148] rk_gmac-dwmac fe1b0000.ethernet end0: FPE workqueue start
[    8.819159] rk_gmac-dwmac fe1b0000.ethernet end0: configuring for phy/rgmii-id link mode
[   10.850841] rk_gmac-dwmac fe1b0000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
[   11.039135] rk_gmac-dwmac fe1b0000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   11.040424] rk_gmac-dwmac fe1b0000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-1
[   11.041874] rk_gmac-dwmac fe1b0000.ethernet end0: Link is Down
[   11.043210] rk_gmac-dwmac fe1b0000.ethernet end0: FPE workqueue stop
[   11.156364] rk_gmac-dwmac fe1b0000.ethernet end0: PHY [stmmac-0:00] driver [Micrel KSZ9031 Gigabit PHY] (irq=POLL)
[   11.166459] dwmac4: Master AXI performs any burst length
[   11.166478] rk_gmac-dwmac fe1b0000.ethernet end0: No Safety Features support found
[   11.166491] rk_gmac-dwmac fe1b0000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[   11.166840] rk_gmac-dwmac fe1b0000.ethernet end0: registered PTP clock
[   11.167197] rk_gmac-dwmac fe1b0000.ethernet end0: FPE workqueue start
[   11.167208] rk_gmac-dwmac fe1b0000.ethernet end0: configuring for phy/rgmii-id link mode
[   13.222385] rk_gmac-dwmac fe1b0000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
[   23.110048] systemd-journald[388]: Time jumped backwards, rotating.
8

Underflow message diagnosis at Collabora

9

Interesting but it should be solved. I wonder if I am the only one with the rk3588 on the Reform and with this issue.

10

I have the RK3588 on my reform and I do NOT have this issue.

There are no messages from reform2_lpc on the dmesg output.
I can also see the battery status as follows:

pff@acai:~$ cat /sys/class/power_supply/BAT0/uevent                            <~
DEVTYPE=power_supply
OF_NAME=spidev
OF_FULLNAME=/spi@feb10000/spidev@0
OF_COMPATIBLE_0=mntre,lpc11u24
OF_COMPATIBLE_N=1
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_TYPE=Battery
POWER_SUPPLY_STATUS=Full
POWER_SUPPLY_TECHNOLOGY=Unknown
POWER_SUPPLY_VOLTAGE_NOW=27098000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=100
POWER_SUPPLY_CHARGE_FULL=1800000
POWER_SUPPLY_CHARGE_FULL_DESIGN=1800000
POWER_SUPPLY_CHARGE_NOW=1800000
POWER_SUPPLY_CHARGE_EMPTY=430000

I installed a fresh system on the nvme drive from a new sd card image when I upgraded the CPU module.

1 Like
11

This is a patch that should avoid the underflow message https://paste.c-net.org/FailedStartled

If you know how to compile a kernel you can install linux-source-arm64 or whatever is the package that has the sources, unpack the source, apply the patch, copy the config from /boot, build the kernel.

Then you should have new spi-rockchip module. You can rmmod the current one, including all other modules that depend on it, insmod the new one, and see if that helps in any way.

1 Like
12

Thank you! I didn’t compiled the kernel for more than 15 years but will try to do…