I’ve put my ZZ9000 into a 4000 fitted with an Apollo 4040 card.
At a cold boot, the scandoubler doesn’t work, If I Ctrl-A-A, then it works. If I use a ZZ screenmode, that appears to work and then if I go back to Amiga native output, the scandoubler is working. It appears starting a ZZ screenmode is somehow starting the scandoubler?
The interesting thing is, If I use an A3630 or A3640 card, it works fine.
I have noticed with the Apollo fitted, I don’t get the quick green flash on the LED on the Zynq board. I get white and red. With the other CPU cards, I get the green flash and it seems to mean the scandoubler is then going to work.
Is it possible that the card somehow doesn’t initialise with certain accelerators?
If you want to ask a technical support question, please include the following details. If not, you can delete all of this text.
- Amiga model: A4000
- 680x0 CPU: 68040 (Apollo 4040 @ 40MHz)
- RAM Configuration: 2C/16F
- Kickstart, AmigaOS Versions: 3.2
- ZZ9000 Firmware version: 1.9
- ZZ9000 Driver version:
- Monitor model:
- Other Zorro cards: