ZZTop Bus Test Results

My ZZ9000 seems to be working fine. However, when I run the ZZTop Bus Test, I get a message toward the end indicating the result is not as expected (0x7a09 instead of 0xffff). See below. Is this an issue?

Thank you,

Wayne

zz_perform_memtest...
Done. 0 errors.
zz_perform_memtest_rand...
`-- Test 0x100000 0/1024...
`-- Test 0x100000 128/1024...
`-- Test 0x100000 256/1024...
`-- Test 0x100000 384/1024...
`-- Test 0x100000 512/1024...
`-- Test 0x100000 640/1024...
`-- Test 0x100000 768/1024...
`-- Test 0x100000 896/1024...
Done. 0 errors.
zz_perform_memtest_delaywrites...
Done. Result: 0x7a09 (should be: 0xffff)
zz_perform_memtest_fpgareg...
Done. Result: 7a09
  • Amiga model: A2000
  • 680x0 CPU: 68030 @ 50 MHz (TF536)
  • RAM Configuration: 1MB chip, 64MB fast
  • Kickstart, AmigaOS Versions: Kickstart 3.1.4, AmigaOS 3.1.4
  • ZZ9000 Firmware version: 1.11 (Zorro II, 2MB)
  • ZZ9000 Driver version: 1.11
  • Monitor model: Vizio VA19L
  • Other Zorro cards: Bridgeboard 2286

Hi, not an issue, it’s a bug of the test that happens only on Z2. Sorry for that.

No problem. Thank you for the quick response.

Similar problem here on Z3 Amiga 4000TX:

zz_perform_memtest_delaywrites…
Done. Result: 0x0 (should be: 0xffff)
zz_perform_memtest_fpgareg…
Done. Result: 0

Hello,

same here on an A4000 (Z3 1.12.1) and a big red and grey bar in the middle of the screen while performing the “BusTest”. After “BusTest” remaining artefacts…

  • Amiga model: A4000 (recapped)
  • 680x0 CPU: 68040 @ 25 MHz (A3640)
  • RAM Configuration: 2MB chip, 16MB fast
  • Kickstart, AmigaOS Versions: Kickstart 3.1, AmigaOS 3.2.1
  • ZZ9000 Firmware version: 1.12.1 (Zorro III)
  • ZZ9000 Driver version: 1.12.1
  • Other Zorro cards: BigRAM Z3 (256 MB), Buddha Z2

Any tips are highly appreciated.

Best regards

Doc Leisure