MNT Pocket Reform runs quite hot with closed lid

[tamberg]

Hi, I forgot to shut down the device, closed the lid and put it in my bag. About an hour later when I took it out, the device was almost too hot to touch. Is there a way to prevent this e.g. by shutting down on closing the lid?

[amospalla]

I have never seen any reference to the pocket having any LID detection mechanism, and I just opened its manual and there is no reference to “LID” (did a text search and found nothing).

I’m just guessing, but I would say there is no close/open lid sensor on the Pocket. The manual has the schematics included so probably it would exist a reference in there if that sensor existed.

[river]

The reform doesn’t have any way to detect a closed lid, so I assume the pocket is the same. Some people were considering adding something with a reed switch

Sleep reform automatically while closing the screen

Hi there Looking for a solution to have automatically suspend my Reform when I close the laptop I am implementing the next: Under sway I configured F1+F12 to execute systemctl suspend I glued two pads to the screen (see photo) When I close the screen F1 and F12 are activated simultaneously and, halas! My Reform sleep. I used a white soft pad that I have around, for aesthetic I will change with black ones Enjoy! [image]